The GSM Alarm Smart Power Switch manages remote alarm sensors and communicates with the user via a GSM network standard mobile telephone.
This device is a security center, from which you are able to communicate with the linked device. With the Power Switch itself, the communication can be done via Remote control, SMS commands, phone calls, android / iOS application, and web applications.
It is plugged in the power outlet and can operate on a 90-250 V, but also comes with a separate CR123A 3 V battery in case of a power blackout. When on battery power, you can not use remote line load functions, but it allows protective security functions.
Not only has the Power Switch a separate battery, but all the devices that come with it have high-quality batteries, making them independent and reliable.
It is an exceptional product in itself – but combined with the Motion Detector MD101, the Door/Window Sensor Switch, and Keychain Remote Control that come with the device – it makes a wireless security system that has many advantages:
- The esthetics will fit in almost any home/office design
- It can be easily placed in hard to reach locations, at places where a cable system would not be possible to set up
- Additional components are easily added – like the siren, door/window sensor or additional keychains (up to 6)
- Should you live in a rented place or decide to move, you can always take your alarm system with you
- It requires no additional phone lines
Furthermore, the Motion Detector is a passive infrared radio channel motion detector, based on the recognition of temperature changes that come from a person who enters the restricted or protected zone. All that is monitored by the lens on a pyroelectric detector.
The Door/Window Sensor lets you know if someone opened a door or window. It has a built-in magnetic sensor switch as well as a Temper sensor (if someone tries to disable it) and communicates via a radio channel with the GSM power switch.
Every piece of the equipment can communicate with the user in multiple ways. If the primary mobile phone or any other programmed mobile phone is not available, you can send commands from other devices using passwords.
Diagram of the GSM Power Switch from User Manual
field_65804868cc332
Description
The GSM Alarm Smart Power Switch manages remote alarm sensors and communicates with the user via a GSM network standard mobile telephone.
This device is a security center, from which you are able to communicate with the linked device. With the Power Switch itself, the communication can be done via Remote control, SMS commands, phone calls, android / iOS application, and web applications.
It is plugged in the power outlet and can operate on a 90-250 V, but also comes with a separate CR123A 3 V battery in case of a power blackout. When on battery power, you can not use remote line load functions, but it allows protective security functions.
Not only has the Power Switch a separate battery, but all the devices that come with it have high-quality batteries, making them independent and reliable.
It is an exceptional product in itself – but combined with the Motion Detector MD101, the Door/Window Sensor Switch, and Keychain Remote Control that come with the device – it makes a wireless security system that has many advantages:
- The esthetics will fit in almost any home/office design
- It can be easily placed in hard to reach locations, at places where a cable system would not be possible to set up
- Additional components are easily added – like the siren, door/window sensor or additional keychains (up to 6)
- Should you live in a rented place or decide to move, you can always take your alarm system with you
- It requires no additional phone lines
Furthermore, the Motion Detector is a passive infrared radio channel motion detector, based on the recognition of temperature changes that come from a person who enters the restricted or protected zone. All that is monitored by the lens on a pyroelectric detector.
The Door/Window Sensor lets you know if someone opened a door or window. It has a built-in magnetic sensor switch as well as a Temper sensor (if someone tries to disable it) and communicates via a radio channel with the GSM power switch.
Every piece of the equipment can communicate with the user in multiple ways. If the primary mobile phone or any other programmed mobile phone is not available, you can send commands from other devices using passwords.
Features and Specifications
Main features of the GSM Alarm Smart Power Switch:
- The power switch can switch a line load on/off if it does not exceed 16A, it operates on 90-250 V and 50-60 Hz current
- Transmits the status of the device to the registered mobile phone number(s) including add-ons
- You can control the network power management via SMS notifications or via the Remote Control
- Supports light and status indicators (Alarm)
- Can be connected up to 6 Keychain Remote Controls
- The Keychain RC can be set up to work as a “Panic Button”
- Has a separate CR123A 3 V battery that serves as power back-up in case of main power failure, thereby it maintains security protection functions
- The settings can be changed in multiple ways: via mobile phone, via online service or Android/iOS applications (links are provided below)
- Can be set up to provide manual or automatic SIM card remaining balance inquiries
GSM Alarm Smart Power Switch Set Full Specifications:
Power Switch | |
Device power supply: | 90-250 V 50/60 Hz |
Line load switching capacity: | 110-220 V 50/60 Hz not to exceed 16 A |
Switching power: | 3.5 kW |
Maximum operating distance for the Keychain Remote Control: | 50 m |
Maximum operating distance for the wireless siren: | 100 m |
Maximum operating distance for the sensors: | 100 m |
GSM module operating standards: | GSM-850/900/1800/1900 |
Maximum quantity of registered Mobile Phones for notification: | 6 |
Maximum quantity of registered Keychain Remote Controls: | 6 |
Maximum quantity of registered Security Sensors: | 6 |
Maximum quantity of wireless sirens: | 1 |
Average delivery time required to send an Alarm notification to the subscriber’s Mobile Phone: | 20-40 seconds |
Type of back-up battery for the GSM Power Switch: | CR2032 3V Lithium battery |
Type of battery for the Keychain Remote: | CR2032 3V Lithium battery |
Control- Temperature operating range Relative air humidity without Vapor condensation, not to exceed: | 93% |
Overall dimensions: | do not exceed 67*80*160 mm |
Weight: | max. 0.3 kg |
Motion Detector MD101 | |
Detection distance at normal sensitivity: | fr 0 – 10m |
Detection distance at reduced sensitivity (“sensitivity” jumper closed): | fr 0 – 8m |
Movement speed range of the violator: | fr 0.3 to 3m/s |
Type of power source: | CR123A (3V lithium) |
Battery operating span, not less than: | 3 years |
Radio signal frequency spectrum: | fr 433.05 to 434.79 MHz |
Radio signal operating range; “line of sight”: | 100m |
Max. transmitter power: | 5 mW |
Interval at which “Heartbeat” control signal transmits: | hourly |
Operating temperature range: | fr -10 to +50 °C |
Dimensions: | 90*58*45 mm |
Weight: | max. 0.1 kg |
Service operating life: | min. 10 years |
Door/Window Sensor Switch | |
Distance (Between sensor & magnet) at which an “Alarm” signal is generated: | 12mm & greater |
Distance at which “Normal” mode is restored: | 10mm & less |
Maximum length of an external wired loop: | 10m |
Impedance of the external wired loop resistor: | 7.5 kOhm |
Type of power source: | CR123A (3V lithium) |
Battery operating span: | min. 3 years |
Radio signal frequency spectrum: | fr 433.05 to 434.79 MHz |
Radio signal operating range; “line of sight”: | 100m |
Maximum transmitter power: | 5 mW |
Interval at which “Heartbeat” control Signal transmits: | hourly |
Operating temperature range: | fr -10 to +50 °C |
Dimensions: | 109*32*27,5 mm |
Dimensions of magnet: | 56,5*18*15,7 mm |
Weight of the Sensor Switch: | 60 g |
Weight of the Magnet: | 10 g |
Feature Focus
GSM Alarm Smart Power Switch Feature Focus:
Controlling the commands from a Mobile Phone
The GSM Power Switch can support SMS commands from a mobile phone when it is plugged in an AC power source.
It also sends a confirmation SMS to the primary registered phone number, but a reply to a balance inquiry will only be sent to the phone from which the command has been made. What that means is that you can send SMS commands from a non-registered phone to the Power Switch, but you will have to add a password.
The exact procedures of programming the above described can be found in the user manual charts below.
Turning the Line Load On/Off via SMS or Keychain
The line load of the Power Switch can be turned on or off via the Remote Control or SMS command. To do that it has to be plugged in in an AC main power source.
It is simple to use, regardless of the method. For the keychain, it is the button “F”, and the light diodes indicate the status – orange/green – on/off. Via SMS you simply send the command and wait for the confirmation message.
Panic Button – the Keychain Remote Control can be setup to work as a Panic button device
Default functions of the Keychain Remote Control:
- Button “A” – Arms the device;
- Button “B” – Disarms the device;
- Button “F” – Turns the device voltage line load On/Off.
The Keychain Remote Controls can be registered to the device, by default it is set up to a value of 0.
In order to convert the “A” button to a Panic button an SMS message is sent.
The result will be the following setup of the Keychain RC:
- Button “A” – “Panic” button
- Button “B” – Arms/Disarms the device
- Button “F” – Turns the device voltage line load On/Off.
Useful Links:
Contents
GSM Alarm Smart Power Switch Package Contents:
- GSM Power Socket
- Keychain Remote Control BN-3S
- Motion Detector MD 101
- Door/Window Sensor Switch DWS102
- User Manual
Notes
For detailed instructions on how to set up the devices, add mobile phone numbers, make adjustments and configurations, please study the PDF manual below.
The manufacturer has provided a list of safety instructions on the first page of the Operating Manual, so that your device can have many years of operation, and that your warranty applies. We highly recommend for you to read, and implement them in the handling of the device.
24 months warranty.
FAQs
Yes, it comes with a separate CR123A 3 V battery to maintain security functions during a power outage. While on battery power, remote line load functions are not available, but security protection functions remain operational. This ensures continuous security monitoring and control even without main power.
It communicates through remote control, SMS commands, phone calls, and Android/iOS applications, as well as web applications. This multi-channel communication ensures users can always interact with their security system, regardless of their current method of communication. The device sends status updates and allows for remote management of the security system.
The Motion Detector uses passive infrared technology to detect temperature changes caused by a person entering a protected zone. It communicates with the GSM Power Switch via a radio channel, enhancing the security system’s ability to monitor movements. This integration provides an additional layer of security by detecting unauthorized access.
Up to 6 Keychain Remote Controls can be connected to the device. These keychains enhance the system’s usability by allowing easy arming, disarming, and control of the power switch, including a panic button function. This feature provides users with a convenient and quick way to manage their security system.
Yes, it is designed for easy placement and can be taken with you if you move to a rented place or decide to relocate. Its wireless nature and independence from additional phone lines make it an ideal choice for temporary or permanent living situations. The system’s portability ensures security is always with you.
Additional components such as a siren, door/window sensor, or extra keychains (up to 6) can be easily added. This flexibility allows for customization and expansion of the security system to fit specific needs and environments. The system is designed to be scalable and adaptable.
Its main features include the ability to switch a line load on/off up to 16A, transmit device status to registered mobile numbers, control network power management via SMS or remote control, support up to 6 Keychain Remote Controls, and maintain security functions during power outages with a backup battery. These features make it a comprehensive security and power management solution.
The Door/Window Sensor detects when a door or window is opened using a built-in magnetic sensor switch and communicates with the GSM Power Switch via a radio channel. It also includes a tamper sensor to alert if someone tries to disable it. This sensor is crucial for perimeter security, alerting users to potential intrusions.
The GSM Alarm Smart Power Switch is a device that manages remote alarm sensors and communicates via GSM network using standard mobile telephony. It allows for remote control, SMS commands, phone calls, and app/web application interactions for managing security systems. The device plugs into a power outlet, operates on 90-250 V, and includes a backup battery for power outages.
The user manual can be found at [https://spyshopwip.xyz/wp-content/uploads/2023/12/Express-GSM-Smart-Power-Switch.pdf](https://spyshopwip.xyz/wp-content/uploads/2023/12/Express-GSM-Smart-Power-Switch.pdf). This manual provides detailed instructions on setting up devices, adding mobile phone numbers, making adjustments, and configurations to ensure optimal use of the device.
Description -
Description
The GSM Alarm Smart Power Switch manages remote alarm sensors and communicates with the user via a GSM network standard mobile telephone.
This device is a security center, from which you are able to communicate with the linked device. With the Power Switch itself, the communication can be done via Remote control, SMS commands, phone calls, android / iOS application, and web applications.
It is plugged in the power outlet and can operate on a 90-250 V, but also comes with a separate CR123A 3 V battery in case of a power blackout. When on battery power, you can not use remote line load functions, but it allows protective security functions.
Not only has the Power Switch a separate battery, but all the devices that come with it have high-quality batteries, making them independent and reliable.
It is an exceptional product in itself – but combined with the Motion Detector MD101, the Door/Window Sensor Switch, and Keychain Remote Control that come with the device – it makes a wireless security system that has many advantages:
- The esthetics will fit in almost any home/office design
- It can be easily placed in hard to reach locations, at places where a cable system would not be possible to set up
- Additional components are easily added – like the siren, door/window sensor or additional keychains (up to 6)
- Should you live in a rented place or decide to move, you can always take your alarm system with you
- It requires no additional phone lines
Furthermore, the Motion Detector is a passive infrared radio channel motion detector, based on the recognition of temperature changes that come from a person who enters the restricted or protected zone. All that is monitored by the lens on a pyroelectric detector.
The Door/Window Sensor lets you know if someone opened a door or window. It has a built-in magnetic sensor switch as well as a Temper sensor (if someone tries to disable it) and communicates via a radio channel with the GSM power switch.
Every piece of the equipment can communicate with the user in multiple ways. If the primary mobile phone or any other programmed mobile phone is not available, you can send commands from other devices using passwords.
EN 
DE
Be the first to ask a question about GSM Alarm Smart Power Switch